HDA025Z
HDA025Z
MCCB X160 3P 18kA 25A
| Cat ref.: | HDA025Z |
| EAN No.: | 3250613136062 |
| P.U.: | 1 prt. |
close all
open all| Type of order: | Toggle |
| Type of case: | Fixed built-in |
| Number of poles: | 3 P |
| Type of pole: | 3P3D |
| Complete device with protection unit: | yes |
| Trip Unit: | TM F/F |
| Integrated earth fault protection: | no |
| Motor drive integrated: | no |
| Rated operational voltage Ue: | 220/415 V |
| Frequency: | 50/60 Hz |
| Rated insulation voltage: | 690 V |
| Rated impulse withstand voltage: | 8000 V |
| With under voltage release: | no |
| Rated ultimate short-circuit breaking capacity Icu under 400V AC IEC 60947-2: | 18 kA |
| Rated service breaking capacity Ics AC according IEC 60947-2: | 100 % |
| Breaking capacity on 1 pole with 230 V NF 60947-2: | 15 kA |
| Breaking capacity on 1 pole with 400 V NF 60947-2: | 9 kA |
| Rated ultimate short-circuit breaking capacity Icu under 230V AC IEC 60947-2: | 25 kA |
| Rated ultimate short-circuit breaking capacity Icu under 240V AC IEC 60947-2: | 25 kA |
| Rated ultimate short-circuit breaking capacity Icu under 415V AC IEC 60947-2: | 18 kA |
| Rated ultimate short-circuit breaking capacity Icu under 440V AC IEC 60947-2: | 15 kA |
| Rated ultimate short-circuit breaking capacity Icu under 690V AC IEC 60947-2: | 4 kA |
| Thermal protection nob setting xIN: | 1 |
| Rating current 10°C according to IEC 60947-2: | 29,3 A |
| Rating current 150°C according to IEC 60947-2: | 28,8 A |
| Rating current 20°C according to IEC 60947-2: | 28,3 A |
| Rating current 25°C according to IEC 60947-2: | 27,7 A |
| Rating current 30°C according to IEC 60947-2: | 27,2 A |
| Rating current 35°C according to IEC 60947-2: | 26,7 A |
| Rating current 40°C according to IEC 60947-2: | 26,1 A |
| Rating current 45°C according to IEC 60947-2: | 25,5 A |
| Rating current 50°C according to IEC 60947-2: | 25 A |
| Rating current 55°C according to IEC 60947-2: | 24,4 A |
| Rating current 60°C according to IEC 60947-2: | 23,7 A |
| Rating current 65°C according to IEC 60947-2: | 23,1 A |
| Rating current 70°C according to IEC 60947-2: | 22,5 A |
| Correction factor of rating current for 2 devices placed side-by-side: | 1 |
| Correction factor of rating current for 3 devices placed side-by-side: | 1 |
| Correction factor of rating current for 4 and 5 devices placed side-by-side: | 1 |
| Correction factor of rating current for 6 devices placed side-by-side: | 1 |
| Total power loss under IN: | 13,7 W |
| Power loss per pole at In: | 4,6 W |
| Tripmode: | TM |
| time of response when opening: | 10 ms |
| Electric endurance in number of cycles: | 1000 |
| Number of mechanical operations: | 4000 |
| Tightening torque: | 6Nm |
| DIN rail mounting with optional adaptator: | yes |
| Connection cross-sect. flexible cable: | 4 / 70mm² |
| Connection cross-sect. rigid cable: | 4 / 95mm² |
| Connection: | Front connection |
| type of connection: | with screw |
| Range of the magnetic adjustment: | 600 A |
| Motor drive optional: | no |
| Category of use: | A |
| Standard text: | IEC 60 947-2 |
| European directive RoHs: | voluntary compliance |
| European directive WEEE: | not concerned |
| Protection index IP: | IP4X |
| Altitude: | 2000 m |
| Storage temperature: | -35 to 70 °C |
| Air humidity protection: | for all climates |
- HDA025Z
HDA025Z
Data is subject to errors and technical modifications.
