HHA123Z
MCCB X160 1P 25kA 125A
Cat ref.: | HHA123Z |
EAN No.: | 3250613136031 |
P.U.: | 1 prt. |
Type of order: | Toggle |
Type of case: | Fixed built-in |
Number of poles: | 1 P |
Type of pole: | 1P1D |
Complete device with protection unit: | yes |
Trip Unit: | TM F/F |
Integrated earth fault protection: | no |
Compatible with DIN rail mounting: | no |
Motor drive integrated: | no |
Frequency: | 50/60 Hz |
Rated operational voltage Ue: | 220/240 V |
Rated insulation voltage: | 690 V |
Rated impulse withstand voltage: | 8000 V |
With under voltage release: | no |
Rated ultimate short-circuit breaking capacity Icu under 400V AC IEC 60947-2: | 25 kA |
Rated service breaking capacity Ics AC according IEC 60947-2: | 80 % |
Breaking capacity on 1 pole with 230 V NF 60947-2: | 21 kA |
Breaking capacity on 1 pole with 400 V NF 60947-2: | 9 kA |
Rated ultimate short-circuit breaking capacity Icu under 230V AC IEC 60947-2: | 25 kA |
Rated ultimate short-circuit breaking capacity Icu under 240V AC IEC 60947-2: | 35 kA |
Rated ultimate short-circuit breaking capacity Icu under 415V AC IEC 60947-2: | 25 kA |
Rated ultimate short-circuit breaking capacity Icu under 440V AC IEC 60947-2: | 20 kA |
Rated ultimate short-circuit breaking capacity Icu under 690V AC IEC 60947-2: | 4 kA |
Thermal protection nob setting xIN: | 1 |
Correction factor of rating current for 2 devices placed side-by-side: | 1 |
Correction factor of rating current for 3 devices placed side-by-side: | 1 |
Correction factor of rating current for 4 and 5 devices placed side-by-side: | 1 |
Correction factor of rating current for 6 devices placed side-by-side: | 1 |
Power loss per pole at In: | 11,7 W |
Total power loss under IN: | 11,7 W |
Tripmode: | TM |
Time of response when opening: | 10 ms |
Electric endurance in number of cycles: | 1000 |
Number of mechanical operations: | 4000 |
Tightening torque: | 6Nm |
DIN rail mounting with optional adaptator: | yes |
Connection cross-sect. rigid cable: | 4 / 95mm² |
Connection cross-sect. flexible conductor: | 4 / 70mm² |
Connection: | Front connection |
Type of connection: | with screw |
Setting type In or Ith: | IN |
Range of the magnetic adjustment: | 1500 A |
Motor drive optional: | no |
Category of use: | A |
Standard text: | IEC 60947-2 |
European directive WEEE: | concerned |
Protection index IP: | IP4X |
Altitude: | 2000 m |
Storage temperature: | -35 to 70 °C |
Air humidity protection: | for all climates |
Data is subject to errors and technical modifications.