• Company
  • Products
  • Solutions
  • Downloads & Services
  • Videos
  • Hager. A partner made for you.
    We are a family-business shaping tomorrow’s electrical world to make people’s lives on our planet safer, cleaner and more enjoyable.
  • Watch and subscribe


ESC466 Contactor 63A,  3NO+1NC,  230V


Contactor 63A, 3NO+1NC, 230V

Cat ref.:ESC466
EAN No.:


P.U.:1 prt.
Technical Characteristics
Type of order:Not applicable
Number of poles:4 P
Frequency:50 Hz
Rated operational voltage Ue:400 V
Rated insulation voltage:440 V
Command voltage AC:230 V
Rated impulse withstand voltage:4 kV
Acceptable current load with AC7 category A:63 A
Acceptable current load with AC7 category B:32 A
Thermal rated current outside of housings:63 A
Inrush power absorbed:60 W
Operating consumption:7 W
Contact rating with 230 V in AC7 category B:3,3 kW
Contact rating with 400 V in AC7 category B:35 kW
Power loss per contact:5 W
Total power loss under IN:17,2 W
Time of response when closing:25 ms
time of response when opening:20 ms
Electric endurance in number of cycles:30000
Number of mechanical operations:1000000
Depth of installed product:60 mm
Height of installed product:85 mm
Width of installed product:54 mm
Max. load fluorescent lamp:3000 VA
Max. power with fluorescent parallel lamps:2100 VA
- in duo circuit:4700 VA
Max. power with incandescent lamps:6500 W
Tightening torque:Coil: 2,5Nm, Power: 3,5Nm
Max cable connect. cross section (flexible) for control:1 to 6 mm²
Rigid cable connect. cross-sect. for control:1 to 10 mm²
Connection cross-sect. rigid cable:4 /25mm²
Connection cross-sect. flexible cable:4 / 16mm²
type of connection:with screw
Number of contacts:4
Type of contacts:3NO+1NC
Can be accessorized:yes
Local operation/hand operation:no
European directive RoHs:compliant
European directive WEEE:concerned
Protection class:isol.class II
Protection index IP:2
Storage temperature:-40 to 80 °C
Device family:ESC
  • ESC466
    ESC466 Contactor 63A,  3NO+1NC,  230V
  • ESC466 Contactor 63A,  3NO+1NC,  230V
Data is subject to errors and technical modifications.