• Company
  • Products
  • Solutions
  • Downloads & Services
  • Videos


SBN125 1P 25A Switch


1P 25A Switch

Cat ref.:SBN125
EAN No.:


P.U.:12 prt.
Technical Characteristics
Type of order:Break switch
Neutral position:without neutral
Number of poles:1 P
Type of pole:1 P
Frequency:50/60 Hz
Rated operational voltage Ue:230 V
Rated insulation voltage:440 V
Type of voltage input 1:AC
Rated impulse withstand voltage:4000 V
Rated operational current in AC21 category A:25 A
Rated operational current in AC21category B:25 A
Acceptable current rating with AC22 category A:25 A
Acceptable current rating with AC22 category B:25 A
Short-circuit current with gI-gG fuses:375 A
Closing ability with 400V in AC23A:529 A
Rated short-circuit making capacity Icm under 240V AC according IEC 60947-3:529 A
Rated short-time withstand current 1s:0,375 kA
Thermal rated current outside of housings:25 A
Power loss per pole at In:0,9 W
Total power loss under IN:0,9 W
Electrical durability at nominal load in AC21in operating cycles:25000
Electrical durability at nominal load in AC22 in operating cycles:25000
Number of mechanical operations:200000
Depth of installed product:68 mm
Height of installed product:83 mm
Width of installed product:17,5 mm
Tightening torque:1,8Nm
Cage clamp position:off set
Connection cross-sect. rigid cable:1,5 / 16mm²
Connection cross-sect. flexible conductor:1,5 / 10mm²
Type of connection:with screw
Quantity of NO contacts:1
Standard text:IEC 60947-3, IEC/EN 60669-2, IEC/EN 60669-4
European directive WEEE:concerned
Protection index IP:IP20
Degree of pollution according to IEC 60664 / IEC 60947-2:2
Altitude:2000 m
Storage temperature:-40 to 80 °C
Device family:SBN
  • SBN125
    SBN125 1P 25A Switch
  • SBN125 1P 25A Switch
Data is subject to errors and technical modifications.