ST303
ST303
Bell transformer 8VA 230V 8-12V
| Cat ref.: | ST303 |
| EAN No.: | 3250615703033 |
| P.U.: | 6 prt. |
close all
open all| Fixing mode: | DIN rail type O (symmetrical) |
| Compatible with DIN rail mounting: | yes |
| Frequency: | 50 Hz |
| Rated operational voltage Ue: | 230 V |
| Rated insulation voltage: | 4000 V |
| Output voltage: | 8/12 V |
| Output voltage 2: | 12 V |
| Output intensity: | 1 A |
| Output intensity 2: | 0,67 A |
| Power consumed: | 8 VA |
| Total power loss under IN: | 2,2 W |
| Depth of installed product: | 65 mm |
| Height of installed product: | 111 mm |
| Width of installed product: | 35 mm |
| Tightening torque: | 1,2Nm |
| Suitable for flush-mounting: | no |
| Suitable for surface mounting: | yes |
| Connection cross-sect. rigid cable: | 6mm² |
| Connection cross-sect. flexible conductor: | 4mm² |
| On/Off switch: | no |
| Short-circuit protected: | yes |
| Standard text: | EN 61558-2-6 |
| European directive WEEE: | concerned |
| Protection index IP: | IP20 |
- ST303
ST303
Data is subject to errors and technical modifications.
