EZN005
EZN005
; "EZN005 Symmetrical Flasher")
; "GLUEHLAMPE__APP-SYMBOL")
; "HV-HALOGENLAMPE__APP-SYMBOL")
; "LEUCHTSTOFFLAMPE__APP-SYMBOL"){kind=small}
Symmetrical Flasher
| Cat ref.: | EZN005 |
| EAN No.: | 3250612469956 |
| P.U.: | 1 prt. |
close all
open all| Fixing mode: | DIN rail type O (symmetrical) |
| Technical version: | flashing symmetrically |
| Switching cycles: | min. 50000 |
| |
|
| Frequency: | 50/60 Hz |
| Nominal voltage: | 12 ... 48 V=/12 ... 230 V~ |
| Max. power with cos phi 0.6: | 5 A |
| Switching current at cos φ = 0.6: | max. 5 A |
| Power consumed: | 15 VA |
| Power consumption (operation): | 15 VA |
| Loss power at full load: | ≈ 2 W |
| Total power loss under IN: | 2 W |
| Power dissipation per coil: | 0,5 W |
| Depth of installed product: | 58 mm |
| Height of installed product: | 85 mm |
| Length: | 64 mm |
| Width of installed product: | 17,5 mm |
| Width of rail mounted device (RMD): | 1 modules |
| Fluorescent lamps: | max. 600 VA |
|
| 230 V incandescent lamps and halogen lamps: | max. 450 W |
| Max. power with incandescent lamps: | 450 W |
| Mounting type: | din-Rail |
| |
| Conductor cross-section (flexible): | 1 … 6 mm² |
| Conductor cross-section (rigid): | 1,5 … 10 mm² |
| Connection cross-sect. rigid cable: | 1,5 / 10mm² |
| Connection cross-sect. flexible conductor: | 1 / 6mm² |
| Type of connection: | with screw |
| Number of contacts: | 1 |
| Type of contacts: | 1 changeover |
| |
| Delay ON: | 0,1 s |
| Time delayed range: | 0.1 s... 10 h |
| Delay time, adjustable: | 0,1 s … 10 h |
| Delay OFF: | 0,1 s |
| |
| Protection index IP: | IP40 |
| Operating temperature: | -10 … 50 °C |
| Storage temperature: | -40 to 70 °C |
| Storage/transport temperature: | -40 … 70 °C |
|
Data is subject to errors and technical modifications.
