EE110
EE110
; "EE110 Light sensitive switch 24H prog.")
; "GLUEHLAMPE__APP-SYMBOL")
; "HV-HALOGENLAMPE__APP-SYMBOL")
; "LEUCHTSTOFFLAMPE__APP-SYMBOL"){kind=small}
; "IP20__PROTECTION-SYMBOL")
Light sensitive switch 24H prog.
| Cat ref.: | EE110 |
| EAN No.: | 3250612251100 |
| P.U.: | 1 prt. |
close all
open all| Fixing mode: | Din-Rail |
| Power reserve: | ≈ 200 h |
| |
| |
| Presence button: | no |
| Frequency: | 50 Hz |
| Operating voltage: | 230 V~ +10%/-15% |
| Acceptable current rating with AC1: | 16 A |
| Max. power with cos phi 0.6: | 10 A |
| Maximum connection distance between receiver and transmitter: | 50m |
| Max. Breaking capacity for parallel compensated fluorescent tubes: | 200 W |
| Max. Breaking capacity for row-compensated fluorescent tubes: | 1000 W |
| Max. power with fluo uncompensated lamps: | 1000 VA |
| Fluorescent lamps duo circuit: | 1000 W |
| Power consumed: | 1,5 VA |
| Power consumption (operation): | 1,5 VA |
| Incandescent bulb power: | 2000 W |
| Total power loss under IN: | 1,5 W |
| Power dissipation per coil: | 0,3 W |
| Electrical durability at nominal load in AC1 in operating cycles: | 50000 |
| Electrical durability with parallel compensated fluorescent tubes: | 4000 |
| Electrical durability with row-compensated fluorescent tubes: | 7500 |
| Electrical endurance cycles with incandescent lighting: | 7500 |
| Running accuracy: | ± 6 min/year |
| Charging time of the power reserve in hours: | 70 |
| Supply voltage: | 230 V |
| Depth of installed product: | 65 mm |
| Height of installed product: | 85 mm |
| Width of installed product: | 88 mm |
| Width of rail mounted device (RMD): | 5 modules |
| Brightness measuring range: | 5 … 2000 lx |
| Brightness measurement range: | 5/2000 Lux |
| Fluorescent lamps uncompensated: | 1000 W |
| Max. power with fluorescent parallel lamps: | 200 VA |
| Max. power fluo. duo lamp comp. series: | 1000 W |
| Fluorescent lamps parallel compensated: | 200 W |
|
| 230 V halogen lamps: | 1000 W |
| Max. power with incandescent lamps: | 2000 W |
| 230 V incandescent lamps: | 2000 W |
| Mounting type: | din-Rail |
| |
| |
| Conductor cross-section (flexible): | 0,5 … 4 mm² |
| Conductor cross-section (rigid): | 0,5 … 4 mm² |
| Connection cross-sect. rigid cable: | 0,5 / 4mm² |
| Connection cross-sect. flexible conductor: | 0,5 / 4mm² |
| Number of contacts: | 1 |
| Type of contacts: | 1 changeover |
| |
| |
|
| Delay ON: | 15 s |
| Delay OFF: | 60 s |
| Shortest switching time: | 15 mn |
| |
| |
| Supply failure reserve: | 200 h |
| |
| |
| Cycle: | daily |
| Protection index IP: | IP20 |
| Operating temperature: | -10 … 50 °C |
| Working accuracy: | 6 mn / year |
| Storage temperature: | -20 to 60 °C |
| Storage/transport temperature: | -20 … 60 °C |
| Main design line: | House electronics |
Data is subject to errors and technical modifications.
