Twilight switch 1 channel, 1M, flush mounted cell EEN101

EAN-Nr.
3250617579315
Packaging
1 Prt.

Technical characteristics

Architecture
  • Fixing mode
    Din-Rail
Configuration
  • Number of modules
    1
Controls and indicators
  • Presence button
    No
Main electrical features
  • Rated operational voltage Ue
    230 V
  • Frequency
    50/60 Hz
Voltage
  • Operating voltage
    230 V~ +10%/-15%
Electric current
  • Max. power with cos phi 0.6
    10 A
Dimensions
  • Depth of installed product
    65 mm
  • Height of installed product
    83 mm
  • Width of installed product
    17.8 mm
Frequency
  • Frequency range
    50…60 Hz
Length
  • Maximum connection distance between receiver and transmitter
    100m
Power
  • Fluorescent lamps duo circuit
    1000 W
  • Max. power with fluo uncompensated lamps
    1000 VA
  • Power consumed
    0.3 VA
  • Power consumption (operation)
    300 mW
  • Incandescent bulb power
    2300 W
  • Total power loss under IN
    0.3 W
  • Power dissipation per coil
    0.3 W
  • Max. Breaking capacity for parallel compensated fluorescent tubes
    200 W
  • Max. Breaking capacity for row-compensated fluorescent tubes
    1000 W
Endurance
  • Electrical endurance cycles with incandescent lighting
    7500
  • Electrical durability at nominal load in AC1 in operating cycles
    50000
  • Electrical durability with parallel compensated fluorescent tubes
    4000
  • Electrical durability with row-compensated fluorescent tubes
    7500
Lighting control
  • Brightness measurement range
    5 / 2000 Lux
Fluorescent bulbs control
  • Max. power with fluorescent parallel lamps
    1000 VA
  • Max. power fluo. duo lamp comp. series
    1000 W
  • Fluorescent lamps parallel compensated
    1000 W
  • Fluorescent lamps uncompensated
    1000
Incandescent bulbs control
  • Max. power with incandescent lamps
    2300 W
Installation, mounting
  • Mounting type
    din-Rail
  • Installation mode
    for mounting on DIN rail, Built-in sensor for mounting in waterproof housing
Connection
  • Connection cross-sect. flexible conductor
    1,5 / 6mm²
  • Connection cross-sect. rigid cable
    1,5 / 6mm²
  • Number of contacts
    1
  • Type of contacts
    contact floating
  • Type of connection
    with screw terminals
Settings
  • Delay ON
    60 s
  • Delay OFF
    80 s
  • Setting
    Switch-on/switch-off delay continuously adjustable via potentiometer
Equipment
  • Brightness
    On/off brightness value individually adjustable
  • Potential-free
    with potential-free normally-open contact
Safety
  • Protection index IP
    IP20
Identification
  • Main design line
    House electronics

Downloads

  • Product image

    Image EEN101  | Hager

    Product Image EEN101

  • Product notice

    Image Instruction manuals for EEN101  | Hager

    Instruction manuals for EEN101

    PDF
    1 MB
  • Product declaration

    Image EU Declaration of conformity for EEN101  | Hager

    EU Declaration of conformity for EEN101

    Declaration

    PDF
    127 KB
  • Product environment profile

    Image Product environmental profile for EEN101  | Hager

    Product environmental profile for EEN101

    PDF
    427 KB
  • Product ROHS

    Image RoHS certificate for EEN101  | Hager

    RoHS certificate for EEN101

    PDF
    33 KB
    Image RoHS certificate for EEN101  | Hager

    RoHS certificate for EEN101

    PDF
    33 KB
More documentation