Motion det. 1.1 m, R.1/R.3/1930/R.cl., p. white glossy 85341139

EAN-Nr.
4011334373902
Packaging
1 Prt.

Technical characteristics

Architecture
  • Fixing mode
    flush-mounting
Functions
  • Mode of operation
    µ-processor controlled mode of operation
  • Function
    Teach function for response brightness via button, with keylock, Party function for switching on for 2 hours, with memory function for presence simulation
Controls and indicators
  • Button / push-button
    with button for on/off/automatic
Dimensions
  • Assembling height
    34 mm
  • Nominal mounting height
    1.1 m
  • Diameter
    57.6 mm
Measurement
  • Detection field, rectangular shaped
    ≈ 12 x 16 m
Reach distance
  • Range, frontal
    ≈ 12 m
  • Range, side
    each ≈ 8 m
Detection
  • Number of detection levels
    3
  • Detection angle, settable
    each side ≈ 45…90 °
  • Detection field Ø, on floor
    0 m
Materials
  • Colour of design line
    polar white
  • Colour
    polarwhite
  • Material
    thermoplastic
Lighting control
  • Response brightness, adjustable
    ≈ 5…1000 lx , daytime operation
LED control
  • LED
    with operation and status LED, red/green/orange, LED application module/insert compatibility display
Settings
  • Response value luminosity adjustable
    Yes
  • Response value sensitivity adjustable
    Yes
  • Response sensitivity, settable
    10…100 %
  • Delay time
    ≈ 180 s
  • Switch-off pre-warning to dimming value 50% for
    30 s
Safety
  • Protection index IP
    IP20
  • Protection
    with dismantling protection
Use conditions
  • Operating temperature
    -5…45 °C
  • Energy-saving
    low intrinsic energy requirement
  • Relative humidity (without condensation)
    0…65 % (without condensation)
Identification
  • Application, usage
    Motion detector
  • Main design line
    Berker R.1/R.3/R.8/Serie 1930/R.classic
  • Secondary design line(s)
    Motion detector, Berker R.1, Berker R.3, Berker R.8
Instructions
  • Special note text
    Note: When integrating this product into the Serie 1930, the 1gang frame for centre plate Ø 58 mm, order no.: 1382 0... may only be used. Installation in multiple combinations of the Serie 1930 is not possible!
  • Information text
    Continuous direct sunlight penetrating the upward-pointing detection plane can result in failure of the motion detector. Only suitable for indoor areas!

Downloads

  • Product image

    Image 85341139  | Hager

    Product Image 85341139

  • Product notice

    Image Instruction manuals for 85341139  | Hager

    Instruction manuals for 85341139

    Manual for 8534xx - Motion detector (EN, 2022-04)

    PDF
    751 KB
  • Product declaration

    Image EU Declaration of conformity for 85341139  | Hager

    EU Declaration of conformity for 85341139

    Declaration of Conformity

    PDF
    1 MB
    Image EU Declaration of conformity for 85341139  | Hager

    EU Declaration of conformity for 85341139

    Declaration of Conformity

    PDF
    1 MB
  • Product environment profile

    Image Product environmental profile for 85341139  | Hager

    Product environmental profile for 85341139

    PEP_Berker_85341139_EN_2822013

    PDF
    113 KB
  • Product ROHS

    Image RoHS certificate for 85341139  | Hager

    RoHS certificate for 85341139

    PDF
    33 KB
    Image RoHS certificate for 85341139  | Hager

    RoHS certificate for 85341139

    PDF
    33 KB
More documentation