ES110A
No picture available
Override contactor 25A 1NO 230V
| Cat ref.: | ES110A |
| EAN No.: | 3250612399994 |
This product is now obsolete. However, this page remains available for information purposes. Please contact your wholesaler in order to find appropriate replacement products. Obsolete reference: ES110A Replacement reference:
close all
open all| Frequency: | 50/60 Hz |
| Rated operational voltage Ue: | 250 V |
| Rated insulation voltage: | 250 V |
| Command voltage AC: | 230 V |
| Rated impulse withstand voltage: | 4 kV |
| Acceptable current rating with AC1: | 20 A |
| Thermal rated current outside of housings: | 25 A |
| Inrush power absorbed: | 15 VA |
| Operating consumption: | 5 VA |
| Contact rating with 230 V in AC1: | 4000 W |
| Power loss per contact: | 1,2 W |
| Total power loss under IN: | 2,05 W |
| Power dissipation per coil: | 0,85 W |
| Time of response when closing: | 30 ms |
| Electric endurance in number of cycles: | 30000 |
| Number of mechanical operations: | 1000000 |
| Depth of installed product: | 61 mm |
| Height of installed product: | 85 mm |
| Width of installed product: | 17,5 mm |
| Max. power with fluorescent parallel lamps: | 1000 VA |
| Max. power fluo. duo lamp comp. series: | 1000VA |
| Max. power with incandescent lamps: | 2500 W |
| Max cable connect. cross section (flexible) for control: | 0,5 to 4 mm² |
| Connection cross-section of the control cable solid: | 1 to 6 mm² |
| Connection cross-sect. rigid cable: | 1,5 / 10mm² |
| Connection cross-sect. flexible conductor: | 1 / 6mm² |
| Type of connection: | with screw |
| Number of contacts: | 1 |
| Type of contacts: | 1NO |
| European directive WEEE: | not concerned |
| Protection index IP: | IP20 |
| Dielectric properties distance between coil and contact: | 4kV |
| Storage temperature: | -40 to 80 °C |
| Device family: | ES |
Data is subject to errors and technical modifications.
